All articles

How to Set Up Unattended Remote Access Safely

A laptop on a desk at night with a glowing padlock above its screen

Short answer: Unattended access lets you connect to your own computer when nobody is there to click Accept. To set it up safely, use a long password that you use nowhere else, check that the connection is encrypted end to end, and turn access off on computers that no longer need it. You also have to keep the remote computer awake and signed in, because most tools, ours included, can't show you a sleeping or locked screen.

We make HandyPeer, so the steps below use it as the example. The advice works for any remote desktop tool. Every HandyPeer detail here comes from our own wiki and was checked on 17 November 2026.

What unattended access is

Normal remote access is attended: you send a request, and someone at the other computer sees it and accepts it.

Unattended access skips that step. You set a password on the remote computer in advance. Later you connect with its ID and that password, and nobody has to approve you. That's handy for your office PC, a home computer you reach from work, or a machine in a back room.

It also means anyone who learns the password gets the same access you do. So a safe setup is more than a password. It's a strong password, limits on guessing, an encrypted connection and a quick way to switch it off.

The risks worth taking seriously

A weak or reused password

Short passwords, birthdays and passwords you also use for email are the first things an attacker tries. Use a long, random password that you keep only for remote access, and store it in a password manager.

HandyPeer accepts passwords of 4 characters or more, but that is the floor, not the advice. Go for 16 or more.

A connection you can't account for

Find out where your screen travels. Some tools route every session through the vendor's servers. Others connect the two computers directly. Both can be safe if the session is encrypted end to end. What matters is that you know which one you have and that nothing along the way can read your screen.

In HandyPeer, our server gives each computer an ID and introduces the two. After that, the picture, sound and files normally flow directly between them, encrypted end to end. If a direct connection can't be made, Pro and Team plans fall back to our relay, which only forwards packets that are already encrypted. Free and Personal show an error instead.

Access you forget about

A computer that was set up for one job three years ago and still accepts a password is easy to forget, and anyone who once had the password still has it. Keep unattended access on only where you need it, and review the list every few months.

How HandyPeer protects the password

  • It never crosses the network. HandyPeer proves both sides know the password with a password-authenticated key exchange (SPAKE2). Someone listening can't capture it or test guesses offline.
  • Guessing is slowed down. After a few wrong passwords, the device trying them is locked out. The wait doubles each time, up to an hour. Too many wrong attempts in one hour switch password access off for everyone for 10 minutes.
  • You're told. The computer shows "Someone entered a wrong unattended-access password" when it happens.
  • Asking still works. While password access is locked, people can still send a normal request that someone has to accept.

The full details are in our security page.

How to set it up safely in HandyPeer

Do these steps on the computer you want to reach later, while you're sitting at it.

Step 1: Install HandyPeer on both computers

Download HandyPeer from the home page for the computer you'll connect to and the one you'll connect from. It runs on Windows 10 and 11, Apple Silicon Macs (Intel Macs aren't supported yet) and 64-bit Linux. No account is needed for the free plan.

Each computer shows its 9-digit ID under This device. Note the ID of the one you want to reach.

Linux: the computer you connect to must run an X11 (Xorg) session. On Ubuntu, pick Ubuntu on Xorg on the login screen. In a Wayland session nobody can see or control that computer, and the app says so.

macOS: turn on HandyPeer under System Settings > Privacy & Security > Screen Recording, and allow any other permission macOS asks for, before you leave. Without them the Mac can't be viewed.

Step 2: Set the unattended-access password

  1. On the remote computer, open Settings.
  2. Turn on Unattended access and enter the password twice.
  3. It saves itself. The main window now shows "Unattended access: on".

If nobody ever sits at this computer, also turn on Only people who know the password can connect, just below the password. Requests without the password are then turned down without asking anyone. The caller sees a message asking for the password.

Step 3: Make sure it stays reachable

This is the step most guides leave out. If the remote computer is asleep or its screen is locked, you'll connect but see a notice instead of the desktop. The picture comes back only when the screen wakes up. So on that computer:

  • In the power settings, stop it from sleeping while it's plugged in.
  • Keep it signed in to your user account, and turn off the automatic screen lock and any screensaver that locks the session.
  • In HandyPeer Settings > Startup and tray, turn on Start with the computer and Keep running in the tray when closed. With both on, the computer stays reachable without the window open.
  • On Windows, set active hours so Windows Update doesn't restart the PC while you need it. After a restart, the PC waits at the sign-in screen, which HandyPeer can't show.

Because the screen stays unlocked, use this setup for computers in a room you control, such as your own office or home, not a shared desk.

Step 4: Test it before you leave

From your other computer, type the ID under Remote device, enter the password in Password (optional) and press Connect. Check that you see the screen and can disconnect cleanly. Turn on Remember password if you want it filled in next time. The password is then kept on that computer only.

Then leave the remote computer alone for longer than its old sleep timer and test again. If all you see is the locked-screen notice, fix the power settings now rather than at 11 pm when you need a file.

Step 5: Decide what a connection may do

Settings > Accepted connections sets what an accepted request may do. A connection with the unattended password can do everything, except save screenshots and recordings when those are switched off there. If you never need recordings of this computer, switch them off.

Step 6: Keep it tidy

  • Share the ID and password only with people who really need them. Don't post them in a chat, ticket or screenshot.
  • Change the password when someone who had it no longer needs it.
  • To stop all access for a while, switch off Others can connect to this device in the main window. The computer then leaves our server, its ID shows as offline and no request reaches it. You can still connect from it to other computers.
  • To stop unattended access for good, open Settings and switch Unattended access off.

Limits to know about

  • Windows administrator windows. Input doesn't reach windows running as administrator or the UAC prompt, because that needs a system service HandyPeer doesn't have yet.
  • Locked and sleeping screens. As described above, HandyPeer can't show them.
  • Some networks. On a small share of networks a direct connection can't be made. Pro and Team then use the encrypted relay. Free and Personal show an error.
  • Free plan time limit. Unattended access works on the free plan, but each session ends at 10 minutes, with a warning 2 minutes before, and the total is 60 minutes a day, for non-commercial use. Paid plans start at $49.99 a year, and a plan on either computer removes the limit. See our pricing page.

Checklist

  • A unique password of 16 or more characters, kept in a password manager
  • The ID and password not shared in email, chat or screenshots
  • The connection is end-to-end encrypted
  • The computer doesn't sleep or lock itself, and sits in a room you control
  • HandyPeer starts with the computer and keeps running in the tray
  • On Linux, an X11 session. On a Mac, Screen Recording allowed
  • Recording and screenshots off if you don't need them
  • Tested, including after the computer sat idle
  • Unattended access on only where you still need it

Attended or unattended?

SituationUse
Your own office or home computerUnattended access
Helping family or a friendAttended: they accept your request
Supporting a clientAttended: they accept your request
A computer nobody sits atUnattended, with Only people who know the password can connect on
A shared computerAttended, unless you control who has the password

If someone is there to approve, let them approve. Keep unattended access for computers that are yours.

Sources

Checked on 17 November 2026.

FAQ

Is unattended remote access safe?

Yes, when the password is long and unique, the connection is encrypted end to end and you switch access off on computers that no longer need it. It's unsafe with a weak or shared password, or on a computer you've forgotten about.

Can someone connect to my computer without the password?

Not without your approval. Without the password, anyone with your ID can only send a request, and someone at your computer has to accept it. With Only people who know the password can connect on, those requests are turned down without asking.

Why do I see a notice instead of the screen?

The remote computer is locked or asleep. HandyPeer can't show a locked or sleeping screen. Once it wakes up, the picture comes back. Change its power and lock settings so it stays awake for remote use.

What if I forget the unattended password?

Set a new one in Settings on that computer. You need to be at the computer to do it. That's by design: a password that could be reset remotely wouldn't protect much.

Do I need a paid plan for unattended access?

No. It works on the free plan, within its limits of 10 minutes per session and 60 minutes a day, for non-commercial use. Paid plans remove the time limit.